Характеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- VGD GD pin peak voltage
- 12 V (- -)
- frequency
- 125 °C
- UART baudrate for fUART,report
- -10 % (9600 +10% baud)
- charging
- 0.3 V (; Tj ≥ 0°C)
- VFB,sw VFB,filtered threshold for the end of the maximum
- 2.0 V (0.8 V 2.2 V)
- V Secondary main output diode forward voltage
- 0.7 V (- -)
- VFB,on VFB,filtered threshold for the start of the on-time
- 0.8 V (- -)
- Vin,low Lowest operational input voltage (rms in case of
- 82 V (VinUV Vin,high)
- charging
- 0.3 V (;Tj < -25°C)
- Vout,start Output charging phase output voltage set-point
- 33 V (Refer GUI VoutOV)
- UART baudrate for fUART
- -10 % (57600 +10% baud)
- cdither Percentage of switching parameter modulation for 10%
- 0 % (20%)
- VoutOV Output overvoltage protection threshold
- 65 V (Vout,start Refer GUI)
- tauto,restart Auto-restart time
- 1.2 s (0.4 s 4s)
- VinOV Input overvoltage protection threshold (rms in
- 350 V (Vin,start,max Refer GUI)
- charging
- 0.3 V (;-25°C < Tj < 0°C)
- VinUV Input undervoltage protection threshold (rms in
- 70 V (Refer GUI Vin,start,min)
- tABM,blank Timeout for ABM entrance
- 6.5 ms (0 ms Refer GUI)
- fsw,max Maximum switching frequency when VFB,filtered is
- 247.2 kHz (26.9 kHz Refer GUI)
- VVCC,min Regulated mode VCC undervoltage protection
- 7.5 V (7.5 V 11 V)
- fburst ABM burst frequency
- 130 Hz (130 Hz 1000 Hz)
- measurement path 0% to
- 100 %
- tss Soft start time step
- 0.5 ms (- -)
- fsw,min Minimum switching frequency
- 26.9 kHz (- -)
- Vstart,OCP1 Output charging phase CS pin maximum voltage
- 0.52 V (Refer GUI VOCP1,at,V,in,low)
- TJ
- 4 °C (typ.)
- Vin,high Highest operational input voltage (rms in case of
- 326 V (Vin,low VinOV)
- IGD,pk Gate driver peak source current
- 30 mA (30 mA 108 mA)
- Vout,cap,rating Main output capacitor voltage rating
- 80 V (10 V 450 V)
- VVCC,max VCC overvoltage protection threshold
- 23 V (23 V 24.9 V)
- tVoutUV,blank Blanking time for regulated mode output
- 500 ms (5 ms 1000 ms)
- VoutUV Regulated mode output undervoltage protection
- 33 V (Refer GUI Refer GUI)
- VFB,ABM VFB,filtered threshold for the ABM/DCM transition
- 0.8 V (- -)
- Tcritical Temperature threshold for IC overtemperature
- 119 °C (Refer GUI 143°C)
- VFB,max,map VFB,filtered threshold which represents the
- 2.0 V (Refer GUI 2.403 V)
- VFB,valley,1 Feedback voltage for the end of the valley
- 1.5 V (Refer GUI VFB,max,map)
- voltage range 0% to
- 100 %
Источники
- XDPL8219 Digital Flyback Controller IC
технический лист; от производителя; издатель: Infineon; редакция: 2026-10-02
Где в источнике: VGD GD pin peak voltage; frequency; UART baudrate for fUART,report; charging; VFB,sw VFB,filtered threshold for the end of the maximum; V Secondary main output diode forward voltage; VFB,on VFB,filtered threshold for the start of the on-time; Vin,low Lowest operational input voltage (rms in case of; Vout,start Output charging phase output voltage set-point; UART baudrate for fUART; cdither Percentage of switching parameter modulation for 10%; VoutOV Output overvoltage protection threshold; tauto,restart Auto-restart time; VinOV Input overvoltage protection threshold (rms in; VinUV Input undervoltage protection threshold (rms in; tABM,blank Timeout for ABM entrance; fsw,max Maximum switching frequency when VFB,filtered is; VVCC,min Regulated mode VCC undervoltage protection; fburst ABM burst frequency; measurement path 0% to; tss Soft start time step; fsw,min Minimum switching frequency; Vstart,OCP1 Output charging phase CS pin maximum voltage; TJ; Vin,high Highest operational input voltage (rms in case of; IGD,pk Gate driver peak source current; Vout,cap,rating Main output capacitor voltage rating; VVCC,max VCC overvoltage protection threshold; tVoutUV,blank Blanking time for regulated mode output; VoutUV Regulated mode output undervoltage protection; VFB,ABM VFB,filtered threshold for the ABM/DCM transition; Tcritical Temperature threshold for IC overtemperature; VFB,max,map VFB,filtered threshold which represents the; VFB,valley,1 Feedback voltage for the end of the valley; voltage range 0% to