RoboMapХарактеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- address
- 0000 h
- EPR
- 8 A (X X Required to resume from erase or program suspend.)
- 指令时序和行为与PP或 4PP 指令相同，仅提供单个字节的数据。请参阅“页编程（PP 02h 或 4PP
- 12 h (）”在 113页。)
- address offset
- 00 h (F0h Parameter ID (RFU))
- name state
- 00 h (= PPB for the sector addressed by the)
- VCC
- 1.7 V to 2.0 V
- SA00
- 00000000 h (–00000FFFh)
- EPR Program Resume
- 8 A (133 0 Yes)
- WVDLR
- 4 A (133 0 No)
- Dword-10
- 07 h (KB sector region)
- Suspend EPR Erase Resume
- 7 A (133 0 Yes)
- Description; 0000h = x8 only
- 0001 h (= x16 only)
- Dword-8
- 07 h (Bit 2 = Erase Type 3 support = 1b)
- EPR
- 7 A (X X Required to resume from erase or program suspend.)
- Output short circuit current[5]
- 100 mA
- 访问，会回绕到同一器件的最低地址。 在 FS01GS 的地址 03FFFFFFh 处进行连续读取后，将接着在
- 00000000 h (处进行读取。在 FS01GS 的地址 07FFFFFFh 处进行连续读取之后，将接着读取 04000000h 处的)
- Refer to “Ordering Information” on page 166 for the model
- 07 h (xxh number definitions.)
- Advanced Sector Protection type, model dependent
- 05 h (xxh)
- (00b
- 1 ms (, 01b: 16 ms, 10b: 128 ms, 11b: 1 s) = 128)
- Parameter Table Pointer Byte 0 (Dword = 4 byte aligned)
- 24 h (D8h)
- SA00
- 00000000 h (–0003FFFFh Sector Starting)
- JEDEC (00b
- 1 ms (, 01b: 16 ms, 10b: 128 ms, 11b: 1 s) = 16 ms)
- SA9
- 00040000 h (–0007FFFFh Sector Ending Address)
- SA7
- 00007000 h (–00007FFFh Sector Starting)
- name state
- 00 h (= DYB for the sector addressed by the DYBRD or)
- SA00
- 0000000 h (–003FFFFh)
- ... FFh RFU
- 0 Ah (FFh RFU)
- Physical Sector Architecture
- 00 h ((Uniform 256 KB physical)
- ,,, Remainder of SFDP header followed by undefined space
- 1000 h
- Supply voltage
- 1.7 V–2.0 V (2.7 V–3.6 V / 1.65 V–3.6 V VIO)
- offset offset
- 00 h (-- N/A A5h CFI Parameter ID (JEDEC SFDP))
- xxh
- 08 h (Reserved)
- Parameter sector location TBPARM_0
- 20 h (_NV TBPARM_0 20h_NV)
- tWL, tCL Clock Low time
- 50 % (PSCK – 5% – ns)
- 接着在 00000000h 处进行读取。在 FS01GS 的地址 07FFFFFFh 处进行连续读取之后，将接着读取
- 04000000 h (处的内容。)
- tWH, tCH Clock High time
- 50 % (PSCK – 5% – ns)
- Bit 3 - AutoBoot support - No = 1b
- 02 h (EBh Bit 2 - 4 byte address instructions supported - Yes = 0b)
- Device ID RSFDP
- 5 A (50 3 Yes)
- + xx_x1xx_xxxxb
- Software reset (see bits 13: 8 in (this)
Источники
- S70FS01GS
технический лист; от производителя; издатель: Infineon; редакция: 2026-10-03
Где в источнике: address; EPR; 指令时序和行为与PP或 4PP 指令相同，仅提供单个字节的数据。请参阅“页编程（PP 02h 或 4PP; address offset; name state; VCC; SA00; EPR Program Resume; WVDLR; Dword-10; Suspend EPR Erase Resume; Description; 0000h = x8 only; Dword-8; Output short circuit current[5]; 访问，会回绕到同一器件的最低地址。 在 FS01GS 的地址 03FFFFFFh 处进行连续读取后，将接着在; Refer to “Ordering Information” on page 166 for the model; Advanced Sector Protection type, model dependent; (00b; Parameter Table Pointer Byte 0 (Dword = 4 byte aligned); JEDEC (00b; SA9; SA7; name state; ... FFh RFU; Physical Sector Architecture; ,,, Remainder of SFDP header followed by undefined space; Supply voltage; offset offset; xxh; Parameter sector location TBPARM_0; tWL, tCL Clock Low time; 接着在 00000000h 处进行读取。在 FS01GS 的地址 07FFFFFFh 处进行连续读取之后，将接着读取; tWH, tCH Clock High time; Bit 3 - AutoBoot support - No = 1b; Device ID RSFDP; + xx_x1xx_xxxxb: Software reset (see bits 13