RoboMapХарактеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- Bit 0 = Not the end descriptor = 0
- 208 h (F1h Region 0 of 4 KB sectors)
- VCC (HL-T)
- -0.5 V to +4.0 V
- Reserved
- 119 h (JEDEC Basic Flash FFh)
- is supported in the 4 KB sector region
- 224 h
- (00b
- 1 ms (, 01b: 16 ms, 10b: 128 ms, 11b: 1 s) = 128 ms = 10b)
- N = 18) = 12h
- 123 h (DCh Erase Type 4 Instruction)
- SA00
- 00000000 h (–00000FFFh)
- Region 2
- 040 h (to 05Fh)
- ration)
- 07 h (= Uniform 256 KB with top and bottom 4 KB Parameter Sectors)
- ID RSFDP_3_0 accesses the Serial Flash Discovery
- 5 A ((CMD) [23:16] [15:8] [7:0] - - - - - Figure 12 3)
- (00b
- 1 ms (, 01b: 16 ms, 10b: 128 ms, 11b: 1 s) = 16ms = 01b)
- VCC / VCCQ (HL-T devices)
- 2.7 V to 3.6 V
- Bit 1= End of map descriptor = 1
- 240 h (F8h Region 0 Uniform 256 KB sectors)
- VCC / VCCQ (HS-T devices)
- 1.7 V to 2.0 V
- Storage temperature plastic packages
- -65°C to +150 °C
- is not supported in the 128 KB sector region
- 220 h (F1h Region 2 of 4 KB sectors)
- (00b
- 1 ms (, 01b: 16 ms, 10b: 128 ms, 11b: 1 s) = 1S = 11b (RFU))
- Reserved
- 115 h (JEDEC Basic Flash FFh)
- SA00
- 00000000 h (–0003FFFFh)
- Parameter DWORD-3 00h Not Supported
- 10 Ah
- Density in bits, zero based, 256Mb = 0FFFFFFFh
- 106 h (Parameter DWORD-2 FFh)
- Bit 0 = Not the end descriptor = 0
- 228 h (F1h Region 0 of 4 KB sectors)
- Bit 0 = Not the end descriptor = 0
- 218 h (F8h Region 0 Uniform 256KB sectors)
- (Default Configu
- 03 h
- and is not supported in the 256 KB sector region
- 214 h
- Bit 4 = 1b
- 100 h
- SA17
- 00040000 h (–0007FFFFh)
- JEDEC Basic Flash Bits 0 = Not Supported = 0b
- 111 h (Parameter DWORD-5 FFh)
- Bit 4 = Not Supported = 0b
- 110 h (EEh)
- DWORD-16 + xx_x1xx_xxxxb
- Software reset (see bits 13: 8 in (this DWORD))
- is not supported in the 128 KB sector region
- 210 h (F8h Region 2 Uniform 256 KB sectors)
- ,,, Remainder of SFDP header followed by undefined space
- 0100 h
- Bits 31:24 = RFU = FFh
- 206 h (JEDEC Sector Map 02h)
- and is not supported in the 192 KB sector region
- 230 h (F8h Region 2 Uniform 256 KB sectors)
- VCC (HS-T)
- -0.5 V to +2.5 V
- is not supported in the 256 KB sector region
- 234 h (F8h Region 3 of 192 KB sector)
- Physical Sector Architecture
- 03 h
- Ambient temperature with power applied
- -65°C to +125 °C
- RSEPD_0_0
- 7 A ((CMD) - - - - - - - -)
- is not supported in the 4 KB sector region
- 238 h (F1h Region 4 of 4 KB sectors)
- Output short circuit current
- 100 mA
- Byte address Description
- 0000 h
- SA33
- 00040000 h (–0007FFFFh)
- range
- 000 h (LSB of Infineon programmed random number Infineon)
- Region 1
- 020 h (to 03Fh)
- Input voltage with respect to ground (VSS)
- -0.5 V (to VCC + 0.5 V)
Источники
- S28HS256T, S28HL256T
технический лист; от производителя; издатель: Infineon; редакция: 2026-10-03
Где в источнике: Bit 0 = Not the end descriptor = 0; VCC (HL-T); Reserved; is supported in the 4 KB sector region; (00b; N = 18) = 12h; SA00; Region 2; ration); ID RSFDP_3_0 accesses the Serial Flash Discovery -; VCC / VCCQ (HL-T devices); Bit 1= End of map descriptor = 1; VCC / VCCQ (HS-T devices); Storage temperature plastic packages; is not supported in the 128 KB sector region; Parameter DWORD-3 00h Not Supported; Density in bits, zero based, 256Mb = 0FFFFFFFh; (Default Configu-; and is not supported in the 256 KB sector region; Bit 4 = 1b; SA17; JEDEC Basic Flash Bits 0 = Not Supported = 0b; Bit 4 = Not Supported = 0b; DWORD-16 + xx_x1xx_xxxxb: Software reset (see bits 13; ,,, Remainder of SFDP header followed by undefined space; Bits 31:24 = RFU = FFh; and is not supported in the 192 KB sector region; VCC (HS-T); is not supported in the 256 KB sector region; Physical Sector Architecture; Ambient temperature with power applied; RSEPD_0_0 -; is not supported in the 4 KB sector region; Output short circuit current; Byte address Description; SA33; range; Region 1; Input voltage with respect to ground (VSS)