Характеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- FRC_freq_max_limit_09_12
- 145 kHz
- Overtemperature OTI or
- 0.4 ms (X X - - - Startup - Waits until condition is)
- ITP_PWM_inc_time_step
- 1 s (100 s Internal temperature protection time step (in)
- GD_voltage
- 4.5 V (15 V Gate voltage settings)
- FRC_freq_min_limit_13_16
- 110 kHz
- Curr_ripple_max_13_16
- 140 mA
- Toff_min 0.4 µs
- 250 kHz (.)
- VIN Undervoltage INPUV
- 1.6 ms (Startup)
- FRC_freq_min_limit_09_12
- 130 kHz
- POUT Overpower PWR
- 6.4 ms (- X - - - Auto-restart mode with 4 tries)
- ITP_temperature_hot1)
- -40 °C (150 °C Hot temperature threshold for internal sensor.)
- Current_sense_OCP1
- 0.4 V (0.6 V This bit field defines range (gain) for the CS OCP1)
- ITP_temperature_critical1)
- -40 °C (150 °C Critical temperature threshold for internal sensor.)
- VOUT Overvoltage OUTOV
- 0.4 ms (- X - - - Auto-restart mode with 4 tries)
- Parameter Name Value Description
- 5 % (Softstart starting value of reference current ramp (% of the)
- TP_PWM_duty_min
- 50 %
- ETP_temperature_hot
- 0 V (1.6 V Hot temperature voltage threshold for external)
- ETP_temperature_critical
- 0 V (1.6 V Critical temperature voltage threshold for external)
- FRC_freq_min_limit_05_08
- 126 kHz
- FRC_freq_max_limit_01_04
- 120 kHz
- Open_out_timeout
- 300 ms (Open output detection time (timeout).)
- Curr_ripple_min_09_12
- 87 mA
- Curr_ripple_max_01_04
- 157 mA
- ETP_PWM_inc_time_step
- 1 s (100 s External temperature protection time step (in)
- V_ADC_th
- 0.6075 V (Ref capacitor discharge ADC voltage threshold.)
- FRC_freq_min_limit_01_04
- 110 kHz
- ETP_startup_PWM_hot
- 50 %
- FRC_freq_max_limit_13_16
- 130 kHz
- Vin_current_range
- 0.209 mA (1.6 mA This bit field selects the measurement range for the)
- GD_current
- 30 mA (118 mA Gate current settings)
- Curr_ripple_min_13_16
- 87 mA
- FRC_freq_max_limit_05_08
- 140 kHz
- Parameter Name Value Description
- 800 mA (First reference current value for HC range. The value should)
- Curr_ripple_min_05_08
- 87 mA
- OCP2_restart_delay
- 130 ms (Final delay time after four OCP2 events are detected.)
- Err_restart_time
- 1000 ms (Error auto-restart time interval.)
- ITP_PWM_dec_time_step
- 1 s (100 s Internal temperature protection time step (in)
- VOUT Undervoltage OUTUV
- 0.8 ms (- X - - - Auto-restart mode with 4 tries)
- Vcc_reference
- 11 V (24 V Reference value of Vcc voltage for external)
- Curr_ripple_min_01_04
- 87 mA
- ETP_PWM_dec_time_step
- 1 s (100 s External temperature protection time step (in)
- Err_current_time
- 500 ms
- Curr_ripple_max_05_08
- 149 mA
- Err_cnt_clear_time
- 65000 ms
- E’
- 150 kHz
- VIN Overvoltage INPOV
- 1.6 ms (X X - - - Startup - Waits until condition is)
- Curr_ripple_max_09_12
- 149 mA
- TP_PWM_period
- 3.2 ms (frequency of the internal IPWM dimming)
- ITP_startup_PWM_hot
- 50 %
- EPWM_detection_timeout
- 50 ms (Timeout for external EPWM detection.)
Источники
- ILD 211 1
технический лист; от производителя; издатель: Infineon; редакция: 2026-10-03
Где в источнике: FRC_freq_max_limit_09_12; Overtemperature OTI or; ITP_PWM_inc_time_step; GD_voltage; FRC_freq_min_limit_13_16; Curr_ripple_max_13_16; Toff_min 0.4 µs; VIN Undervoltage INPUV; FRC_freq_min_limit_09_12; POUT Overpower PWR; ITP_temperature_hot1); Current_sense_OCP1; ITP_temperature_critical1); VOUT Overvoltage OUTOV; Parameter Name Value Description; TP_PWM_duty_min; ETP_temperature_hot; ETP_temperature_critical; FRC_freq_min_limit_05_08; FRC_freq_max_limit_01_04; Open_out_timeout; Curr_ripple_min_09_12; Curr_ripple_max_01_04; ETP_PWM_inc_time_step; V_ADC_th; FRC_freq_min_limit_01_04; ETP_startup_PWM_hot; FRC_freq_max_limit_13_16; Vin_current_range; GD_current; Curr_ripple_min_13_16; FRC_freq_max_limit_05_08; Parameter Name Value Description; Curr_ripple_min_05_08; OCP2_restart_delay; Err_restart_time; ITP_PWM_dec_time_step; VOUT Undervoltage OUTUV; Vcc_reference; Curr_ripple_min_01_04; ETP_PWM_dec_time_step; Err_current_time; Curr_ripple_max_05_08; Err_cnt_clear_time; E’; VIN Overvoltage INPOV; Curr_ripple_max_09_12; TP_PWM_period; ITP_startup_PWM_hot; EPWM_detection_timeout