Характеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- Operating temperature –30°C
- 85 °C
- Width (Y)
- 16.61 ± 0.15 mm
- Bluetooth® silicon
- 5.9 mA ((radio only))
- Operating humidity (relative, non-condensation) 5%
- 85 %
- Maximum component height Height (H)
- 0.80 mm (typical)
- Line Regulation
- 2.7 V (≤ VIN ≤ 3.3 V, VOUT = 2.5 V – – 25 mV/V)
- Shield height Height (H)
- 1.20 mm (typical)
- Thermal ramp rate –
- 10 °C (/minute)
- ESD
- Module integrated into system –: 15 kV (Air)
- Bluetooth® LE silicon
- 22 mA ((radio only, 10.5 dBm))
- License
- IC: 7922 A (-3053)
- Module size
- 12.00 mm × 16.61 mm × 1.70 mm
- Components[24]
- 2.0 kV (Contact)
- PSRR COUT = 2.2 µF,
- 1.235 V ( VIN 1.4 V,)
- Figure 11
- 32 kHz (Oscillator block diagram)
- Line Regulation
- 1.235 V ( VIN 1.4 V – – 10 mV/V)
- Module dimensions Length (X)
- 12.00 ± 0.15 mm
- ISED
- 7922 A (-3053)
- product must be labeled in its exterior with “Contains IC
- 7922 A (-3053”.)
- Antenna location dimensions Length (X)
- 12.00 mm
- PCB thickness Height (H)
- 0.50 ± 0.10 mm
- Storage temperature –40°C
- 85 °C
- Input Supply Voltage
- 0 to 3.3 V (40 – – µs)
- Storage temperature and humidity –
- 85 °C (at 85%)
- Return Loss
- 10 dB (minimum)
- Width (Y)
- 4.55 mm
- Line Regulation
- 1.235 V ( VIN 1.4 V – 5 10 mV/V)
Источники
- CYBT-243053-02
технический лист; от производителя; издатель: Infineon; редакция: 2026-10-03
Где в источнике: Operating temperature –30°C; Width (Y); • Bluetooth® silicon; Operating humidity (relative, non-condensation) 5%; Maximum component height Height (H); Line Regulation; Shield height Height (H); Thermal ramp rate –; ESD: Module integrated into system –; • Bluetooth® LE silicon; License: IC; - Module size; Components[24]; PSRR COUT = 2.2 µF,; Figure 11; Module dimensions Length (X); • ISED; product must be labeled in its exterior with “Contains IC; Antenna location dimensions Length (X); PCB thickness Height (H); Storage temperature –40°C; Input Supply Voltage; Storage temperature and humidity –; Return Loss