Technical Information

Характеристики

Грузоподъёмность

нет данных

Вылет

нет данных

Повторяемость позиционирования

нет данных

Масса

нет данных

Степень защиты

нет данных

Характеристики из источника

Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.

Feed rate

6 m (/min Feed rate: 6 m/min Feed rate: 0.4 m/min)

источник 1

Focus on drilling

6.2 %

источник 2

manufactured to near net shape before

10.5 %

источник 2

accuracy

60 %

источник 2

Measuring lengths

240 mm to 3040 mm (70 mm to 1640 mm)

источник 3

for a crankcase. The example shows that

10 %

источник 2

minimum. Signal converters, for example,

24 hours (, thereby releasing residual)

источник 3

principle of the LIF 400 and innovative

20 %

источник 4

mounting tolerances in spite of the small

0 %

источник 4

the machining time is reduced by about

12 % (by increasing the contour tolerance)

источник 5

rated into engine, transmission and axle

12.3 % (Brushing)

источник 2

seam is manufactured throughout with a

25 mm (diameter cutter. This results in a)

источник 1

Ideal movement

360 °

источник 1

Max. feed rate

3.5 m (/min.)

источник 6

encoder into two sinusoidal signals with

90 ° (phase shift. Both methods require that)

источник 4

with equal grating periods are moved

360 ° (elec.)

источник 4

electrical signals. The specially structured

90 ° (Phase shift)

источник 4

second workpiece is simply machined

10 mm (below the first. Between the two)

источник 6

Machining time

2 h

источник 6

feed rates during roughing and finishing. Medium feed rate

2.8 m (/min.)

источник 6

structure are manufactured completely

± 0.02 mm

источник 1

determined among other factors by the

50 %

источник 2

must be machined with a defined distance,

16,000 rpm (, a thermal drift at the spindle)

источник 2

by an edge (Figure 6). The farther the drives

350 mm

источник 6

Very small signal periods usually come

60 %

источник 4

considerable frictional heat in the

0 m

источник 6

whereas feed rates from 0.5 m/min to

1 m (/min are used for finishing. Rapid)

источник 6

Inclination angle

40 ° (Inclination angle: 40°)

источник 1

The powertrain of a vehicle can be sepa­

0.4 %

источник 2

during machine acceptance and the

±0.1 mm (, 99.73 % of all tolerance dimen-)

источник 2

Figure 6 shows the distribution of tolerance

20 %

источник 2

scanning method, the large scanning field,

100 %

источник 4

between the scanning head and scale

40 % (LIF 400)

источник 4

modules [1], and these modules in turn

44.5 %

источник 2

Signal period

360 ° (elec.)

источник 7

An essential prerequisite for optical

120 %

источник 4

production features also exist on cylinder

0 %

источник 2

Bake-out temperature 100 °C

120 °C

источник 3

tolerance divisions for production features

30 %

источник 2

Line spacing

1.5 mm (Line spacing: 0.2 mm Inclination angle: 55°)

источник 1

Источники

1. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: Feed rate; seam is manufactured throughout with a; Ideal movement; structure are manufactured completely; Inclination angle; Line spacing

2. Technical Information

   технический лист; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: Focus on drilling; manufactured to near net shape before; accuracy; for a crankcase. The example shows that; rated into engine, transmission and axle; determined among other factors by the; must be machined with a defined distance,; The powertrain of a vehicle can be sepa­; during machine acceptance and the; Figure 6 shows the distribution of tolerance; modules [1], and these modules in turn; production features also exist on cylinder; tolerance divisions for production features

3. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: Measuring lengths*; minimum. Signal converters, for example,; Bake-out temperature 100 °C

4. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: principle of the LIF 400 and innovative; mounting tolerances in spite of the small; encoder into two sinusoidal signals with; with equal grating periods are moved; electrical signals. The specially structured; Very small signal periods usually come; scanning method, the large scanning field,; between the scanning head and scale; An essential prerequisite for optical

5. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: the machining time is reduced by about

6. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: Max. feed rate; second workpiece is simply machined; Machining time; feed rates during roughing and finishing. Medium feed rate; by an edge (Figure 6). The farther the drives; considerable frictional heat in the; whereas feed rates from 0.5 m/min to

7. Technical Information

   страница товара; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03

   Где в источнике: Signal period