RoboMapХарактеристики
- Степень защиты
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- (for measuring lengths starting from
- 1240 mm (, mounting via mounting spar)
- ≤ 8500 rpm
- ≤ 6250 rpm
- Storage medium SSDR (240 GB) or CFR (CFast
- 30 GB (or 60 GB))
- Supply voltage
- 10 V to 30 V
- encoder coupling
- 1550 Hz ((cable)
- Inside diameter D1
- 40 mm (55 mm 70 mm 80 mm 105 mm 130 mm 180 mm 260 mm 380 mm)
- Mech. permissible speed
- ≤ 50 rpm (≤ 45 rpm)
- Inside diameter
- 12 mm (25 mm 30 mm 40 mm 55 mm 12 mm 25 mm 30 mm 40 mm 55 mm)
- Output-side
- ≤ 6000 rpm
- D > 30 mm
- ≤ 4000 rpm
- Hollow shaft diameter
- 35 mm (MRP 5010)
- Blind hollow shaft diameter
- 8 mm
- Mech. permiss. shaft speed
- ≤ 9000 rpm
- Mech. permissible speed
- ≤ 250 rpm (≤ 220 rpm)
- Mech. permissible speed
- ≤ 3000 rpm (≤ 1000 rpm)
- Outside diameter D2
- 194 mm
- Maximum permissible
- 50 N
- IP rating
- IP67
- IP rating
- IP66 (shaft inlet ( upon request))
- of temperature exceedance to each other
- 180° ±5 ° () • Encoder inputs: 1 VPP, 11 µAPP,)
- encoder coupling
- 1800 Hz (Revolutions)
- Probing speed
- ≤ 3 m (/min ≤ 1 m/min ≤ 3 m/min ≤ 1 m/min)
- encoder coupling
- 1000 Hz
- Housing outside diameter
- 87 mm
- Scale tape from the roll
- 240 mm to 3040 mm (140 mm to 240 mm to 6040 mm Scale tape from the roll)
- Outside diameter D2
- 64.37 mm
- IP rating
- IP66 (Up to protection)
- Shaft diameter D
- 10 mm (, 12 mm)
- Inside diameter D1
- 104 mm
- Shock 6 ms
- ≤ 300 m
- IP rating
- IP40 (Up to protection)
- Mech. permissible speed3)
- ≤ 2000 rpm (≤ 1500 rpm (operating temperature ≤ 50 °C) ≤ 2000 rpm)
- Measuring range
- 68 mm x 68 mm (,)
- Vibration 55 Hz to 2000 Hz
- ≤ 200 m (/s2 (EN 60068-2-6))
- MRP 8000
- 100 mm (hollow shaft )
- Motor-side hollow
- 34 mm (, 32 mm** 20 mm, 25 mm, 25 mm*, 22.5 mm**)
- Operating temperature
- ≤ 115 °C (≤ 90 °C)
- Probe repeatability
- 2 s (≤ 1 μm 2 s ≤ 0.25 μm 2 s ≤ 1 μm 2 s ≤ 0.25 μm)
- D ≤ 30 mm
- ≤ 6000 rpm
- Inside diameter D1
- 40 mm (55 mm 80 mm 100 mm 40 mm 55 mm 60 mm 100 mm)
- IP rating
- IP40
- Outside diameter D2
- 30 mm (18.6 mm)
- Outside diameter D2
- 57 mm (75 mm 109 mm 151 mm)
- Inside diameter D1
- 13 mm (32 mm 62 mm 104 mm)
- Inside diameter D1
- 5 mm (–)
- Housing outside diameter
- 58 mm (Interface)
- Mech. permissible speed3)
- ≤ 3000 rpm (RCN 2x81: ≤ 1500 rpm ≤ 3000 rpm ≤ 3000 rpm)
- Block-processing time
- < 0.5 ms
- Measuring range
- 12 mm (30 mm 25 mm 60 mm 12 mm)
- ≤ 115 °C
- ≤ 100 °C (≤ 120 °C; 4096 lines: ≤ 100 °C)
- Output-side hollow
- 29 mm (, 21 mm** 16 mm, 20 mm, 20.5 mm*, 14 mm**)
- IP rating
- IP00 (• protection)
- Measuring lengths ML
- 240 mm to 3040 mm (140 mm to 240 mm to 70 mm to Scale tape from the roll)
- RCN 280
- ≤ 3000 rpm
- measuring tasks to position and speed encoder coupling
- 1500 Hz
- IP rating
- IP68 (Protection EN 60529)
- Operating temperature
- 10 °C to 50 °C (infrared)
- Maximum permissible
- 300 N (1500 N 300 N 1500 N)
- Cable length
- ≤ 30 m (via NC non-rechargeable)
- Outside diameter D2
- 113.16 mm (128.75 mm 150.88 mm 176.03 mm 213.24 mm 257.5 mm 326.9 mm)
- tation tracks are available for synchronous encoder coupling
- 1000 Hz
- Inside diameter D1
- 70 mm (80 mm 105 mm 130 mm 160 mm 180 mm 260 mm)
- Mech. permissible speed
- ≤ 3000 rpm (≤ 10 000 rpm)
- Shaft diameter D
- 4 mm (, 6 mm, 8 mm)
- IP rating
- IP67 (• protection at housing, IP64 at)
- IP rating
- IP67 (at housing (IP66 with hollow)
- Measuring lengths ML
- 20 mm to 1020 mm (370 mm to 3040 mm 20 mm to 1020 mm 20 mm to 3040 mm)
- Measuring range
- ±15 g (, ±30 g, ±60 g)
- MRP 8100
- 80 mm (hollow shaft )
- Mechanically permissible speed
- 6000 rpm
- Maximum permissible
- 200 N
- IP rating
- IP40 (• protection when mounted)
- Probe repeatability
- 2 s (≤ 1 µm (probing speed: 1 m/min))
- Diameter D1
- 458.62 mm (573.20 mm 1146.10 mm)
- Block-processing time
- 1.5 ms
- Shaft diameter
- 6 mm (with synchro flange)
- and compact. • Shaft diameter
- 4 mm
- Storage medium CFR (CFast
- 30 GB (or 60 GB))
- Housing outside diameter
- 35 mm
- Diameter D1
- 458.04 mm (572.63 mm 1145.73 mm)
- Mech. permiss. shaft speed ≤ 2600 rpm
- ≤ 2000 rpm (≤ 1200 rpm ≤ 950 rpm)
- ERA 7401 C
- segment version: 10 m
Источники
- General Catalog
технический лист; от производителя; издатель: HEIDENHAIN; редакция: 2026-10-03
Где в источнике: IP rating; (for measuring lengths starting from; ≤ 8500 rpm; Storage medium SSDR (240 GB) or CFR (CFast; Supply voltage; encoder coupling; Inside diameter D1; Mech. permissible speed; Inside diameter; Output-side; D > 30 mm; • Hollow shaft diameter; • Blind hollow shaft diameter; Mech. permiss. shaft speed; Outside diameter D2; Maximum permissible; of temperature exceedance to each other; Probing speed; • Housing outside diameter; Scale tape from the roll; Shaft diameter D; Shock 6 ms; Mech. permissible speed3); Measuring range; Vibration 55 Hz to 2000 Hz; • MRP 8000; Motor-side hollow; Operating temperature; Probe repeatability; D ≤ 30 mm; Block-processing time; ≤ 115 °C; Output-side hollow; Measuring lengths ML; RCN 280; measuring tasks to position and speed encoder coupling; Cable length; tation tracks are available for synchronous encoder coupling; MRP 8100; • Mechanically permissible speed:; Diameter D1; • Shaft diameter; and compact. • Shaft diameter; Storage medium CFR (CFast; Mech. permiss. shaft speed ≤ 2600 rpm; • ERA 7401 C: segment version