RoboMapХарактеристики
- Грузоподъёмность
- нет данных
- Вылет
- нет данных
- Повторяемость позиционирования
- нет данных
- Масса
- нет данных
- Степень защиты
- нет данных
Характеристики из источника
Строки приведены так, как их печатает производитель: без перевода, пересчёта и сравнения.
- Total Shrinkage, normal
- 60×60×2 mm (; 350 bar; 1 h 90 °C)
- Stress at Break
- 5 mm (/min)
- Coefficient of Linear Thermal Expansion (CLTE), normal
- 23 to 85 °C
- Temperature of Deflection under Load (HDT)
- 1.80 MPa
- Coefficient of Linear Thermal Expansion (CLTE), parallel
- 23 to 85 °C
- Yield Stress
- 5 mm (/min)
- Flexural Stress at 3.5 % Flexural Strain
- 2 mm (/min)
- Yield Strain
- 5 mm (/min)
- Total Shrinkage, normal
- 60×60×2 mm (; 650 bar; 1 h 90 °C)
- Puncture Impact Behavior - Puncture Energy
- 23 °C
- Temperature of Deflection under Load (HDT)
- 0.45 MPa
- Flexural Modulus
- 2 mm (/min)
- Charpy Impact Strength
- -30 °C
- Molding Shrinkage, normal
- 60×60×2 mm (; 650 bar)
- Molding Shrinkage, normal
- 60×60×2 mm (; 350 bar)
- Strain at Break
- 5 mm (/min)
- Flexural Strength
- 2 mm (/min)
- Coefficient of Linear Thermal Expansion (CLTE), parallel
- 23 to 55 °C
- Molding Shrinkage, parallel
- 60×60×2 mm (; 350 bar)
- Coefficient of Linear Thermal Expansion (CLTE), normal
- 23 to 55 °C
- Water Absorption (Equilibrium Value)
- 23 °C (; 50 % r. h.)
- Vicat Softening Temperature
- 50 N (; 120 °C/h)
- Puncture Impact Behavior - Maximum Force
- 23 °C
- Charpy Impact Strength
- 23 °C
- Total Shrinkage, parallel
- 60×60×2 mm (; 650 bar; 1 h 90 °C)
- Total Shrinkage, parallel
- 60×60×2 mm (; 350 bar; 1 h 90 °C)
- Izod Impact Strength
- 23 °C
- Flexural Strain at Flexural Strength
- 2 mm (/min)
- Molding Shrinkage, parallel
- 60×60×2 mm (; 650 bar)
- Melt Volume-flow Rate (MVR)
- 270 °C/5 kg
- Izod Impact Strength
- -30 °C
- Tensile Modulus
- 1 mm (/min)
Источники
- Makroblend® UT235 M
страница товара; от производителя; издатель: Covestro; редакция: 2026-10-03
Где в источнике: Total Shrinkage, normal; Stress at Break; Coefficient of Linear Thermal Expansion (CLTE), normal; Temperature of Deflection under Load (HDT); Coefficient of Linear Thermal Expansion (CLTE), parallel; Yield Stress; Flexural Stress at 3.5 % Flexural Strain; Yield Strain; Puncture Impact Behavior - Puncture Energy; Flexural Modulus; Charpy Impact Strength; Molding Shrinkage, normal; Strain at Break; Flexural Strength; Molding Shrinkage, parallel; Water Absorption (Equilibrium Value); Vicat Softening Temperature; Puncture Impact Behavior - Maximum Force; Total Shrinkage, parallel; Izod Impact Strength; Flexural Strain at Flexural Strength; Melt Volume-flow Rate (MVR); Tensile Modulus